How To Convert A 2-seater Jeep Wrangler Into A 5-seater?
If you have a 2-seater Jeep Wrangler and want to convert it to a 5-seater due to a large family. Then don’t worry, as in this article we are going to discuss and demonstrate “how to convert a 2-seater Jeep Wrangler into a 5-seater Jeep Wrangler.”
How To Convert A 2-seater Jeep Wrangler Into A 5-seater?
Many people enjoy the Jeep Wrangler as a car. The limited seating, though, can prove disappointing. Three seats are available in Jeep Wranglers, two of which are bucket seats located in the front and one of which is a bench.
Two people can fit in the rear seat of the two-door Wrangler model. The back passenger capacity is increased to three in four-door variants, giving you a total of five seats. Below are all the paperwork, equipment, and methods that you should use to convert a 2-seater Jeep Wrangler into a 5-seater.
Paperwork Before Modification
Modifying a Jeep Wrangler or any other car is not an easy thing to do. You should first get the permission of the producers and manufacturers. Only manufacturers may easily modify the so-called “company” or commercial Jeep Wrangler, and there are a few things you can do.
You’ll need to get a certificate of conformity from the producers or manufacturers, which calls for having a professional look at the car. Then purchase a complete conversion kit to turn your Jeep Wrangler into a 5-seater. You may either do it yourself or get an automobile professional to perform it.
But sometimes, this is not an issue in most areas, so you can just modify your vehicle via approved automobile modifiers or by yourself.
Now, look at the equipment you will require for the conversion.
Equipment
- Seats/belts.
- seat brackets.
- Set of a drill, a socket, and a wrench.
Step-by-step Guide On How To Convert Your 2-seater Jeep Wrangler Into A 5-seater
You can easily convert a 2-seater Jeep Wrangler into a 5-seater Jeep Wrangler with our six step guide. So, carefully read and follow this guide below.
Step 1
You must first remove the carpet in your cargo compartment to have access to the subfloor. Until you are ready to replace the carpet, store it safely away. Certain variants allow the installation of a subwoofer in the cargo area. Depending on the seat and brackets you choose, you might also need to remove them.
Step 2
This phase is a bit challenging and demands close attention. When marking, first check the bracket placements. You should fasten the seat to the brackets and position everything to check for clearance between the seat and the tailgate and window.
Step 3
Now start drilling. But first, make sure to inspect underneath the car to make sure nothing critical will be pierced by your holes. Make sure there is adequate space because you will likely need to install a nut and washer on the underside.
Once you are certain that everything is in its proper location and that there is adequate space beneath, you can begin drilling your holes.
Step 4
After you are done, attach the brackets. You almost certainly need to add a nut and washer to the underside of any modified brackets. Use high-quality bolts since this will keep the passengers safe in the case of an accident. Make sure you select a washer with a large diameter to avoid the washer pushing through.
The brackets need to be well-made and incredibly strong. If you want a different seat, you may take exact measurements and make new brackets yourself. Or you can have them made at a nearby machine shop. Whatever you choose, be sure the brackets are sturdy and high-quality enough to hold the weight of your passengers as well as the seat in the case of an accident.
Step 5
Overlay the carpet on top of the brackets and fix it in position. Trim the bracket’s protrusion if necessary. Once you’ve located the bracket’s edge under the carpet using your hands, you may cut a little along that line. From there, you should be able to feel below and on top of the cuts to determine the location of the remaining cuts.
Step 6
Now it’s time to install your seats. Allow seat locks to attach to bolts before inserting bolts into brackets. The bracket and seat may both be fastened together using bolts. If the seat has integrated seatbelts, you won’t have to worry about them, but not all seats do. In the event that your seatbelts are screwed in, attach them to these bolts as well.
Other Methods To Convert A 2-seater Jeep Wrangler Into A 5-seater Wrangler
If you are finding it difficult to convert your Jeep Wrangler, then you can seek professional help. There are thousands of automobile specialists out there who can modify your Jeep Wrangler. It is the simplest course of action if you decide to have your Jeep Wrangler 2-seater converted into a 5-seater at a professional facility.
He will undoubtedly have much easier access to the parts catalog, be able to provide you with the certificate of compliance.And allow you to complete the next stages without any hesitation.
Price
It is important to be aware that a set of seats, includes installation. It will run you between 2,500 and 3,500 euros at a dealer. And you must also factor in the cost of the technical inspection, the mine entrance fee, and the registration for a new vehicle.
Therefore, consider carefully whether purchasing your Jeep Wrangler business or advertisement is financially attractive for you.
3 Important Steps to follow After Conversion
Now that we have done the conversion, there are a few instructions and rules you should follow. These instructions and rules are given below.
1. Seat Inspection
After conversion, whether you do it by yourself or with professional help, you should check your seats thoroughly. Check to see if they are conformable. And different people with different heights and weights can easily sit on them or not. Also, another issue is, some of these seats tilt forward, so also take a look at that.
2. Car Conversion Registration
After conversion, there are some administrative rules and steps you have to follow. It is crucial to complete all the requirements as soon as possible since you only have one month from the time your Jeep Wrangler has been modified to change your vehicle’s registration.
Following a change in a car, you must bring the vehicle in for the required roadworthiness test. It is essential to check if your modified Jeep Wrangler is safe to drive on the roads. It is good for both you and your fellow drivers. Bring the car to the mine so that workers there can confirm that the number of seats in your Jeep Wrangler has changed.
3. Insurance Company
You also need to alert your insurance company about the conversion of the seats in your Jeep Wrangler. And after that, you are free and ready to ride in your newly modified Jeep Wrangler.
Read More:
Frequently Asked Questions
Can Five People Fit In A 2-door Jeep?
Yes, a 2-door Jeep Wrangler can fit 5 people in it. The back seat of the two-door Wrangler version may accommodate two passengers. The rear passenger capacity is increased to three in the four-door models, giving you a total seating capacity of five.
A Jeep Wrangler May Include A Hidden Compartment?
The center console’s lid conceals a hidden storage space. However, the hidden one may be accessible through the higher storage, which is in the console. A portion of the lid wall may be removed at that point, exposing a tiny amount of space.
Can Two Individuals Remove The Jeep Wrangler Hardtop?
A Jeep Wrangler has three hard tops in total, two of which are in the front and one in the back. One person can easily remove the front hard tops because of their design. Two people are needed to operate the hardtop in the back.
In A Jeep, Are The Seats Removable And Interchangeable?
Most Jeep replacement seats may be easily installed by utilizing the already factory mounts. There are replacement seats for Jeeps that come with reclining capabilities, more suspension for off-roading, weatherproofing, and other features. These seats are available for both the front and rear seats.
Is A Jeep Better Off With A Hard Or Soft Top?
A Jeep’s cabin is more insulated with a hardtop than with a soft top. Hardtops’ thicker fiberglass helps keep warm air inside during the winter and cool air outside when it’s hot. As a result, Jeeps with hardtops are frequently significantly more pleasant to drive than Jeeps with cloth tops.
